PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

 

e-ISSN 2231-8526
ISSN 0128-7680

Home / Regular Issue / JST Vol. 31 (1) Jan. 2023 / JST-3488-2022

 

The Impacts of Passive Design Strategies on Building Indoor Temperature in Tropical Climate

Maryam Qays Oleiwi and Mohd Farid Mohamed

Pertanika Journal of Science & Technology, Volume 31, Issue 1, January 2023

DOI: https://doi.org/10.47836/pjst.31.1.06

Keywords: Building simulation, double storey house, IES-VE software, indoor temperature, shading devices, thermal comfort, timber walls

Published on: 3 January 2023

Traditional buildings in Malaysia were developed for hundreds of years to respond to the local climate. Occupants can comfortably occupy the traditional buildings without a mechanical system such as an air conditioning system. However, in many modern buildings, whether houses, mosques or shophouses, similar traditional strategies are not extensively adopted; thus, they are very dependent on the mechanical system to achieve good thermal comfort. Therefore, this study aims to investigate the effect of selected passive cooling strategies on the indoor temperature of a building in a tropical climate. The methodology adopted in this study was computer simulation validated with measured data from a selected case study. The thermal comfort of a case study was examined with different passive cooling strategies that were applied using IES-VE 2019 building simulation software. The simulation was conducted for various design strategies, such as adding shading devices and closing the curtains to decrease the amount of solar radiation that enters the house from the windows, using timber for walls and clay tiles for the roofs and examining seven different orientations to find the best strategy for the house. All these strategies were tested and compared between full-day natural ventilation and without any ventilation. The thermal comfort of these strategies was graphically defined based on the operative temperature. The results of this study revealed that protecting the windows from solar radiation by adding shading devices and closing the curtains had the lowest indoor operative temperature achievement compared to other examined strategies.

  • Adekunle, T. O., & Nikolopoulou, M. (2016). Thermal comfort, summertime temperatures and overheating in prefabricated timber housing. Building and Environment, 103, 21-35. https://doi.org/10.1016/j.buildenv.2016.04.001

  • Amir, A., Mohamed, M. F., Sulaiman, M., & Yusoff, W. F. M. (2019). Assessment of indoor thermal condition of a low-cost single story detached house: A case study in Malaysia. Alam Cipta, 12(1), 80-88.

  • ASHRAE. (2009). ASHRAE handbook of fundamentals. American Society of Heating, Refridgerating and Airconditioning Engineers. https://www.pdfdrive.com/2009-ashrae-handbook-fundamentals-si-edition-e169690158.html

  • ASHRAE. (2010). Standard 55-2010: Thermal environmental conditions for human occupancy. American Society of heating, Refridgerating and Airconditioning Engineers. https://www.techstreet.com/ashrae/standards/ashrae-55-2010?product_id=1741646

  • ASHRAE. (2017). Standard 55-2017: Thermal environmental conditions for human occupancy. American Society of Heating, Refridgerating and Airconditioning Engineers. https://www.techstreet.com/ashrae/standards/ashrae-55-2017?gateway_code=ashrae&product_id=1994974

  • Basri, S., Zakaria, S., & Kamarudina, S. K. J. J. K. (2021). Review on alternative energy education in Malaysia. Jurnal Kejuruteraan, 33(3), 461-472. https://doi.org/10.17576/jkukm-2021-33(3)-08

  • Bhikhoo, N., Hashemi, A., & Cruickshank, H. (2017). Improving thermal comfort of low-income housing in Thailand through passive design strategies. Sustainability, 9(8), Article 1440. https://doi.org/10.3390/su9081440

  • Brager, G., & de Dear, R. (2000). A standard for natural ventilation. Center for the Built Environment.

  • Dong, Y., Cui, X., Yin, X., Chen, Y., & Guo, H. J. A. S. (2019). Assessment of energy saving potential by replacing conventional materials by cross laminated timber (CLT) - A case study of office buildings in China. Applied Sciences, 9(5), Article 858. https://doi.org/10.3390/app9050858

  • Gamero-Salinas, J., Monge-Barrio, A., Kishnani, N., López-Fidalgo, J., & Sánchez-Ostiz, A. (2021). Passive cooling design strategies as adaptation measures for lowering the indoor overheating risk in tropical climates. Energy and Buildings, 252, Article 111417. https://doi.org/10.1016/j.enbuild.2021.111417

  • Huang, L., & Kang, J. (2021). Thermal comfort in winter incorporating solar radiation effects at high altitudes and performance of improved passive solar design - Case of Lhasa. In Building Simulation (Vol. 14, No. 6, pp. 1633-1650). Tsinghua University Press.

  • Husen, N. A., & Mohamed, M. F. (2021). Comparison of green design strategies in five traditional malay houses. Jurnal Kejuruteraan, 33(1), 47-53.

  • Imran, H. M., Kala, J., Ng, A., & Muthukumaran, S. (2018). Effectiveness of green and cool roofs in mitigating urban heat island effects during a heatwave event in the city of Melbourne in southeast Australia. Journal of Cleaner Production, 197, 393-405. https://doi.org/10.1016/j.jclepro.2018.06.179

  • Kamal, M. A. (2010). A study on shading of buildings as a preventive measure for passive cooling and energy conservation in buildings. International Journal of Civil Environmental Engineering, 10(6), 19-22.

  • Khavari, A. M., Pei, S., & Tabares-Velasco, P. C. (2016). Energy consumption analysis of multistory cross-laminated timber residential buildings: A comparative study. Journal of Architectural Engineering, 22(2), Article 04016002.

  • Kildsgaard, I., Jarnehammar, A., Widheden, A., & Wall, M. (2013). Energy and environmental performance of multi-story apartment buildings built in timber construction using passive house principles. Buildings, 3(1), 258-277. https://doi.org/10.3390/buildings3010258

  • Kim, M., Leigh, S. B., Kim, T., & Cho, S. (2015). A study on external shading devices for reducing cooling loads and improving daylighting in office buildings. Journal of Asian Architecture and Building Engineering, 14(3), 687-694. https://doi.org/10.3130/jaabe.14.687

  • Kim, S. H., Shin, K. J., Kim, H. J., & Cho, Y. H. (2017). A study on the effectiveness of the horizontal shading device installation for passive control of buildings in South Korea. International Journal of Polymer Science, 2017, Article 3025092. https://doi.org/10.1155/2017/3025092

  • Kubota, T., Chyee, D. T. H., & Ahmad, S. (2009). The effects of night ventilation technique on indoor thermal environment for residential buildings in hot-humid climate of Malaysia. Energy and Buildings, 41(8), 829-839. https://doi.org/10.1016/j.enbuild.2009.03.008

  • Kubota, T., Toe, D. H. C., & Ossen, D. R. (2014). Field investigation of indoor thermal environments in traditional Chinese shophouses with courtyards in Malacca. Journal of Asian Architecture and Building Engineering, 13(1), 247-254. https://doi.org/10.3130/jaabe.13.247

  • Latif, S. N. A., Chiong, M. S., Rajoo, S., Takada, A., Chun, Y. Y., Tahara, K., & Ikegami, Y. J. E. (2021). The trend and status of energy resources and greenhouse gas emissions in the Malaysia power generation mix. Energies, 14(8), Article 2200. https://doi.org/10.3390/en14082200

  • Mirrahimi, S., Mohamed, M. F., Haw, L. C., Ibrahim, N. L. N., Yusoff, W. F. M., Aflaki, A. (2016). The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot-humid climate. Renewable and Sustainable Energy Reviews, 53, 1508-1519. https://doi.org/10.1016/j.rser.2015.09.055

  • MMD. (2017). General climate of Malaysia. Malaysia Meteorological Department. http://www.met.gov.my/en/web/metmalaysia/home

  • Mohamed, M. F. (2020). Sustainable design approaches in Malaysia’s traditional mosques and houses. In Proceeding International Conference on Engineering (Vol. 1, No. 1, pp. 13-21). Tunas Pembangunan SurakartaUniversity. https://doi.org/10.36728/icone.v1i1.1263

  • Olawale-Johnson, O. P., Ajwang, P., & Ondimu, S. N. (2021). Reducing cooling demands in Sub-Saharan Africa: A study on the thermal performance of passive cooling methods in enclosed spaces. Journal of Sustainable Development of Energy, Water and Environment Systems, 9(4), 1-13. https://doi.org/10.13044/j.sdewes.d7.0313

  • Oleiwi, M. Q. (2020). Thermal comfort of residential buildings using industrialised building system through natural ventilation in hot and humid climate of Malaysia (Doctor of philosophy). Universiti Kebangsaan Malaysia, Malaysia. WEBSITE URL??

  • Oleiwi, M. Q., & Mohamed, M. F. (2021). An investigation on indoor temperature of modern double storey house with adapted common passive design strategies of Malay Traditional House. Pertanika Journal of Science Technology, 29(2). 1135-1157. https://doi.org/10.47836/pjst.29.2.24

  • Oleiwi, M. Q., Mohamed, M. F., Sulaiman, M. K. A. M., Che-Ani, A. I., & Raman, S. N. (2019). Thermal environment accuracy investigation of integrated environmental solutions-virtual environment (IES-VE) software for double-story house simulation in Malaysia. Journal of Engineering and Applied Sciences, 14(11), 3659-3665. https://doi.org/10.36478/JEASCI.2019.3659.3665

  • Prieto, A., Knaack, U., Auer, T., & Klein, T. (2018). Passive cooling & climate responsive façade design exploring the limits of passive cooling strategies to improve the performance of commercial buildings in warm climates. Energy and Buildings, 175, 30-47. https://doi.org/10.1016/j.enbuild.2018.06.016

  • Rana, M. J., Hasan, M. R., & Sobuz, M. H. R. (2021). An investigation on the impact of shading devices on energy consumption of commercial buildings in the contexts of subtropical climate. Emerald Publishing Limited. https://doi.org/10.1108/SASBE-09-2020-0131

  • Santamouris, M. (2016). Cooling the buildings - Past, present and future. Energy and Buildings, 128, 617-638. https://doi.org/10.1016/j.enbuild.2016.07.034

  • SEforALL. (2020). Chilling prospects: Tracking sustainable cooling for all - 2020. https://www.seforall.org/system/files/2020-07/CP-2020-SEforALL.pdf

  • Shafique, M., & Kim, R. (2017). Application of green blue roof to mitigate heat island phenomena and resilient to climate change in urban areas: A case study from Seoul, Korea. Journal of Water and Land Development, 33(1), 165-170. https://doi.org/10.1515/jwld-2017-0032

  • Sulaiman, M. K. A. M. (2017). Cooling effect performance of indirect green facade on building in tropical climate of Malaysia (Doctor of philosophy). Universiti Kebangsaan Malaysia, Malaysia.

  • Taleb, H. M. (2014). Using passive cooling strategies to improve thermal performance and reduce energy consumption of residential buildings in UAE buildings. Frontiers of Architectural Research, 3(2), 154-165. https://doi.org/10.1016/j.foar.2014.01.002

  • Tang, C. K., & Chin, N. (2013). Building energy efficiency technical guideline for passive design. Public Works Department Malaysia. http://www.mgbc.org.my/bseep-building-energy-efficiency-technical-guideline-for-passive-design/

  • Yeganeh, M. (2020). Conceptual and theoretical model of integrity between buildings and city. Sustainable Cities and Society, 59, Article 102205. https://doi.org/10.1016/j.scs.2020.102205

  • Yusoff, W. F. M. (2020). The effects of various opening sizes and configurations to air flow dispersion and velocity in cross-ventilated building. Jurnal Teknologi, 82(4), 17-28. https://doi.org/10.11113/jt.v82.14537

  • Yusoff, W. F. M., & Mohamed, M. F. (2017). Building energy efficiency in hot and humid climate. Elsevier.

  • Yusoff, W. F. M., & Ja’afar, N. H. (2019). Preliminary evaluation of indoor thermal comfort in Malaysia heritage mosque. In MATEC Web of Conferences (Vol. 277, p. 02016). EDP Sciences Publishing.

ISSN 0128-7680

e-ISSN 2231-8526

Article ID

JST-3488-2022

Download Full Article PDF

Share this article

Recent Articles