PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY

Mycelium, a root-like fungi network, possesses distinctive characteristics that render it an appealing contender for replacing polystyrene (PS). Drying in the oven is one of the most commonly used methods for producing mycelium composites. However, achieving its desired properties requires proper control of the drying temperature. This research aims to develop a mycelium-based composite by utilising an edible mushroom, specifically Pleurotus ostreatus (oyster mushroom), as an alternative to non-biodegradable materials for packaging applications. The composite is developed by inoculating Pleurotus ostreatus fungi into the substrate, mainly consisting of kenaf, wheat bran and CaCO3. Afterwards, the composite was incubated for 20 days and then subjected to drying at different oven temperatures (e.g. 40°C, 60°C, and 80°C) for 24 hours. Our findings indicate that the desirable mechanical properties of mycelium composite were found at 60°C, where flexural strength, flexural modulus and impact strength were obtained at 0.11 MPa, 4.15 GPa and 635.8 N, respectively. The moisture content was 26.13%, and the shrinkage was 20.73%. The obtained density of 0.15 g/cm3 was compared to the density of PS, which is 1.04 g/cm3. This research indicates that a lightweight composite material, consisting of a network of interconnected hyphae that function as a natural adhesive, holds significant potential as a viable solution for achieving a more sustainable and environmentally friendly future, primarily due to its biodegradability.

• Akromah, S, Chandarana, N., & Eichhorn S. J. (2024). Mycelium composites for sustainable development in developing countries: The case for Africa. Advanced Sustainable Systems, 8(1), Article 2300305. https://doi.org/10.1002/adsu.202300305
  
  Alemu, D., Tafesse, M., & Monda, A. K. (2022). Mycelium-based composite: The future sustainable biomaterial. International Journal of Biomaterials, 2022(1), Article 8401528. https://doi.org/10.1155/2022/8401528
  
  Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wosten, H. A. B. (2019). Fabrication factors influencing mechanical, moisture and water-related properties of mycelium-based composites. Materials and Design, 161, 64–71. https://doi.org/10.1016/j.matdes.2018.11.027
  
  Attias, N., Danai, O., Abitbol, T., Tarazi, E., Ezov, N., Pereman, I., & Grobman, Y. J. (2020). Mycelium bio-composites in industrial design and architecture: Comparative review and experimental analysis. Journal of Cleaner Production, 246, Article 119037 https://doi.org/10.1016/j.jclepro.2019.119037
  
  Bagheriehnajjar, G., Yousefpour, H., & Rahimnejad, M. (2023). Multi-objective optimization of mycelium-based bio-composites based on mechanical and environmental considerations. Constructions and Building Materials, 407, Article 133346. https://doi.org/10.1016/j.conbuildmat.2023.133346
  
  Brudny, K., Lach, M., Kozub, B., & Korniejenko, K. (2024). Development of fungal biocomposites for construction applications. Materials Science & Engineering Technology, 55(5), 569-578. https://doi.org/10.1002/mawe.202400018
  
  Elsacker, E., Vandelook, S., Brancart, J., Peeters, E., & Laet, L. D. (2019). Mechanical, physical and chemical characterisation of mycelium-based composites with different types of lignocellulosic substrates. PLoS One, 14(7), Article e0213954. https://doi.org/10.1371/journal.pone.0213954
  
  Gaff, M., Hosseini, S. B. Paulasova, D., Kamboj, G., Rezaei, F., & Paul, D. (2024). Functionality of production processes in mycelium-based composites. Composite Structures, 344, Article 118309. https://doi.org/10.1016/j.compstruct.2024.118309
  
  Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., Picu, R. C. (2018). Mechanical behavior of mycelium-based particulate composites. Journal of Materials Science, 53, 16371-16382. https://doi.org/10.1007/s10853-018-2797-z
  
  Jones, M., Bhat, T., Kandare, E., Thomas, A., Joseph, P., Dekiwadia, C., Yuen, R., John, S., Ma, J., & Wang, C. (2018). Thermal degradation and fire properties of fungal mycelium and mycelium - Biomass composite materials. Scientific Reports, 8(1), Article 17583. https://doi.org/10.1038/s41598-018-36032-9
  
  Jones, M., Mautner, A., Luenco, S., Bismarck, A., & John, S. (2020). Engineered mycelium composite construction materials from fungal biorefineries: A critical review. Materials and Design, 187, Article 108397. https://doi.org/10.1016/j.matdes.2019.108397
  
  Kim, B. M., Jung, E. S., Aan, Y. H., Hwang, I. W., & Chung, S. K. (2016). Drying characteristics and physical properties of medicinal and edible mushrooms. Food Science and Preservation, 23(5), 689-695. https://doi.org/10.11002/kjfp.2016.23.5.689
  
  Madusanka, C., Udayanga, D., Nilmini, R., Rajapaksha, S., Hewawasam, C., Manamgoda, D., & Vasco-Correa, J. (2024). A review of recent advances in fungal mycelium based composites. Discover Materials, 4(13), Article 13. https://doi.org/10.1007/s43939-024-00084-8
  
  Manan, S., Ullah, M. W., Ul-Islam, M., Atta, O. M., & Yang, G. (2021). Synthesis and applications of fungal mycelium-based advanced functional materials. Journal of Bioresources and Bioproducts, 6(1), 1–10. https://doi.org/10.1016/j.jobab.2021.01.001
  
  Mandliya, S., Vishwakarma, S., & Mishra, H. N. (2022). Modeling of vacuum drying of pressed mycelium (pleurotus eryngii) and its microstructure and physicochemical properties. Journal of Food Process Engineering, 45(10), Article e14124. https://doi.org/10.1111/jfpe.14124
  
  Peng, L., Yi, J., Yang, X., Xie, J., & Chen, C. (2023). Development and characterization of mycelium bio-composites by utilization of different agricultural residual byproducts. Journal of Bioresources and Bioproducts, 8(1), 78-89. https://doi.org/10.1016/j.jobab.2022.11.005
  
  Piskov, S., Timchenko, L., Grimm, W. D., Rzhepakovsky, I., Avanesyan, S., Sizonenko, M., & Kurchenko, V. (2020). Effects of various drying methods on some physico-chemical properties and the antioxidant profile and ACE inhibition activity of oyster mushrooms (Pleurotus ostreatus). Foods, 9(2), Article 160. https://doi.org/10.3390/foods9020160
  
  Sakunwongwiriya, P., Taweepreda, W., Luenram, S., Chungsiriporn, J., & Iewkittayakorn, J. (2024). Characterization of uncoated and coated fungal mycelium-based composites from water hyacinth. Coatings, 14(7), Article 862. https://doi.org/10.3390/coatings14070862
  
  Santos, I. S., Nascimento, B. L., Marino, R. H., Sussuchi, E. M., Matos, M. P., & Griza, S. (2021). Influence of drying heat treatments on the mechanical behavior and physico-chemical properties of mycelial biocomposite. Composites Part B: Engineering, 217, Article 108870. https://doi.org/10.1016/j.compositesb.2021.108870
  
  Sim, K. Y., Liew, J. Y., Ding, X. Y., Chong, W. S., & Intan, S. (2017). Effect of vacuum and oven drying on the radical scavenging activity and nutritional contents of submerged fermented maitake (Grifola frondosa) mycelia. Food Science and Technology, 37(1), 131-135. https://doi.org/10.1590/1678-457X.28816
  
  Sydor, M., Bonenberg, A., Doczekalska, B., & Cofta, G. (2021). Mycelium-based composites in art, architecture, and interior design: A review. Polymers, 14(1), Article 145. https://doi.org/10.3390/polym14010145
  
  Sydor, M., Cofta, G., Doczekalska, B., & Bonenberg, A. (2022). Fungi in mycelium-based composites: Usage and recommendations. Materials, 15(18), Article 6283. https://doi.org/10.3390/ma15186283
  
  Yang, L., Park, S., & Qin, Z. (2021). Material function of mycelium-based bio-composite: A review. Frontiers in Materials, 8, Article 737377. https://doi.org/10.3389/fmats.2021.737377