e-ISSN 2231-8542
ISSN 1511-3701
Muhammad Auni Hairunnaja, Mohd Aizudin Abd Aziz, Nur Amira Fatihah Bashari, Mohd Azmir Arifin, Navinash Nedumaran, Khairuddin Md Isa and Umi Fazara Md Ali
Pertanika Journal of Tropical Agricultural Science, Volume 31, Issue 5, August 2023
DOI: https://doi.org/10.47836/pjst.31.5.25
Keywords: Grease formulation, spent bleaching earth, waste cooking oil
Published on: 31 July 2023
Many applications use Spent Bleaching Earth (SBE) despite being considered hazardous waste from the palm oil refinery process. Its production increases yearly, similar to waste cooking oil (WCO). The SBE is known as a thickener in grease formulation. The same goes for red gypsum, waste motor oil, stearic acid, and lithium hydroxide monohydrate. They are all considered thickeners but have different durability in protecting base oil in grease. Then, previous studies revealed their performances with side effects detection against the environment and human bodies. Cooking oil is a heat transfer medium for serving foods with higher amounts of unsaturated fatty acids. The number of fatty acids might change after cooking oil consumption and become highly demanded due to the chemical properties of density, viscosity and fatty acids. Nowadays, people lack awareness of the importance of recycling palm oil waste. They intend to dispose of it instead of recycling it for sustainable energy resources. Therefore, this paper will discuss the grease formulation, contaminant available in WCO, its treatment, issues regarding different thickener consumption, treatment against Spent Bleaching Earth (SBE), and propose the safe thickener and additives for future intakes. This study found that adding Fume Silica (F.S.) as a thickener and Molybdenum Disulfide (MoS2) enhanced the grease stability. Further treatment against SBE (remove residue oil) and WCO (metal elements, undesired impurities and water content) is necessary for providing good quality formulated grease.
Abdulbari, H. A., Oluwasoga Akindoyo, E., & Mahmood, W. K. (2015). Renewable resource-based lubricating greases from natural and synthetic sources: Insights and future challenges. ChemBioEng Reviews, 2(6), 406-422. https://doi.org/10.1002/cben.201500006
Abdulbari, H. A., Rosli, M. Y., Abdurrahman, H. N., & Nizam, M. K. (2011). Lubricating grease from spent bleaching earth and waste cooking oil: Tribology properties. International Journal of the Physical Sciences, 6(20), 4695-4699. https://doi.org/10.5897/IJPS11.561
Abdulbari, H., Zuhan, N., & Mahmood, W. (2017). Biodegradable grease from palm oil industry wastes. Journal of Advanced Research in Fluid Flow, 1-10
Adhikari, C., Proctor, A., & Blyholder, G. D. (1994). Diffuse-reflectance fourier-transform infrared spectroscopy of vegetable oil triglyceride adsorption on silicic acid. Journal of the American Oil Chemists’ Society 71, 589-594. https://doi.org/10.1007/BF02540584
Afzan, M., Ithnin, A. M., & Jazair, W. (2020). Combustion performance and exhaust emission analysis of Spent Bleaching Earth (SBE) oil as burner’s fuel. In U. Sabino, F. Imaduddin & A. R. Prabowo (Eds.), Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (pp. 713-721). Springer. https://doi.org/10.1007/978-981-15-4481-1_68
Almeida, D. T., Viana, T. V., Costa, M. M., de Santana Silva, C., & Feitosa, S. (2019). Effects of different storage conditions on the oxidative stability of crude and refined palm oil, olein and stearin (Elaeis guineensis). Food Science and Technology, 39(1), 211-217. https://doi.org/10.1590/fst.43317
Anderson, K. J. (1991). A history of lubricants. MRS Bulletin, 16(10), 69-69. https://doi.org /10.1557/S0883769400055895
Antony, J., Mittal, B., Naithani, K., Misra, A., & Bhatnagar, A. (1994). Molybdenum disulphide combinations in lubricating greases. Wear, I74, 33-37
Awogbemi, O., Onuh, E., & Inambao, F. L. (2019). Comparative study of properties and fatty acid composition of some neat vegetable oils and waste cooking oils. International Journal of Low-Carbon Technologies, 14(3), 417-425. https://doi.org/10.1093/ijlct/ctz038
Barthel, H., Rösch, L., & Weis, J. (2005). Fumed silica ‐ Production, properties, and applications. In N. Auner & J. Weis (Eds.), Organosilicon Chemistry II (pp.761-778). Wiley. https://doi.org/10.1002/9783527619894.ch91
Bei, H., George, E., Kenik, E., & Pharr, G. (2003). Directional solidification and microstructures of near-eutectic Cr–Cr3Si alloys. Acta Materialia, 51(20), 6241-6252. https://doi.org/10.1016/S1359-6454(03)00447-6
Chanrai, N. G., & Burde, S. G. (2004). Recovery of oil from spent bleaching earth. US Patent, 6(780), 321.
Cheong, K., Loh, S., & Salimon, J. (2013). Effect of spent bleaching earth based bio organic fertilizer on growth, yield and quality of eggplants under field condition. AIP Conference Proceedings, 1571, 744-748. https://doi.org/10.1063/1.4858743
Cui, X., Chen, H., & Yang, T. (2016). Research progress on the preparation and application of nano-sized molybdenum disulfide. Acta Chimica Sinica, 74, 392-400. https://doi.org/10.6023/A15110712
De Leonardis, A., Macciola, V., & Falice, M. (2000). Copper and iron determination in edible oil by graphite furnace atomic absorption spectrometry after extraction with dilute nitric acid. International Journal of Food Science & Technology, 35(4), 371-375. https://doi.org/10.1046/j.1365-2621.2000.00389.x
Dees, S., Gasteuil, A., Kaufmann, R. K., & Man, M. (2008). Assessing the factors behind oil price changes (Working Paper No. 855). European Central Bank. https://www.researchgate.net/publication/4890967_Assessing_the_factors_behind_oil_price_changes
Delaneau, J. (2021). What is stearic acid for? Oceanica Skincare. https://oceanicaskin.care/blogs/news/what-is-stearic-acid-for
Dermawan, D., & Ashari, M. L. (2018). Studi pemanfaatan limbah padat industri pengolahan minyak kelapa sawit spent bleaching earth sebagai pengganti agregat pada campuran beton [Study on the utilization of palm oil processing industry solid waste spent bleaching earth as a substitute for aggregate in concrete mixtures]. Jurnal Presipitasi Media Komunikasi dan Pengembangan Teknik Lingkungan, 15(1), 7-10. https://doi.org/10.14710/presipitasi.v15i1.7-10
Dye, J. L. (2021). Lithium. Encyclopedia Britannica. https://www.britannica.com/science/lithium-chemical-element
Epshteyn, Y., & Risdon, T. J. (2010, January 28-30). Molybdenum disulfide in lubricant applications – A review. [Paper presentation]. Proceedings of the 12 Lubricating Grease Conference, Goa, India. http://www.nlgi-india.org/images/PDF/Yakov%20Ephsteyn.pdf
Farid, M. A., Roslan, A. M., Hassan, M. A., Hasan, M. Y., Othman, M. R., & Shirai, Y. (2020). Net energy and techno-economic assessment of biodiesel production from waste cooking oil using a semi-industrial plant: A Malaysia perspective. Sustainable Energy Technologies and Assessments, 39, Article 100700. https://doi.org/10.1016/j.seta.2020.100700
Fattah, R. A., Mostafa, N. A., Mahmoud, M. S., & Abdelmoez1, W. (2014). Recovery of oil and free fatty acids from spent bleaching earth using sub-critical water technology supported with kinetic and thermodynamic study. Advances in Bioscience and Biotechnology, 5(3), 261-272. https://doi.org/10.4236/abb.2014.53033
Feo, G. D., Domenico, A. D., Ferrara, C., Abate, S., & Osseo, L. S. (2020). Evolution of waste cooking oil collection in an area with long-standing waste management problems. Sustainability, 12(20), Article 8578. http://dx.doi.org/10.3390/su12208578
Fink, J. (2021). Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids (3rd ed.). Gulf Professional Publishing. https://doi.org/10.1016/C2020-0-02705-2
Garcia, D. D., Latorre, R. R., Sultan, N. M., Yerba, O. R., Palacios, E. A., & Cano, A. D. (2019). Silicosis: Origins and consequences. American Journal of Medical Sciences and Medicine, 7(3), 60-63. https://doi.org/10.12691/ajmsm-7-3-2
Godson, T. E., & Vinoth, E. (2015). Biodiesel production from waste cooking oil. International Journal of Students’ Research In Technology & Management, 3(8), 448-450. https://doi.org/10.18510/ijsrtm.2015.383
Gordon, M. (2004). 7 - Factors affecting lipid oxidation. In R. Steele (Ed.), Understanding and Measuring the Shelf-Life of Food (pp. 128-141). Woodhead Publishing. https://doi.org/10.1533/9781855739024.1.128.
Ha, S. W., Weitzmann, M. N., & Beck Jr, G. R (2013). Chapter 4 - Dental and skeletal applications of silica-based nanomaterials. In K. Subramani, W. Ahmed, & J. K. Hartsfield (Eds.), Nanobiomaterials in Clinical Dentistry (pp. 69-91). William Andrew Publishing. https://doi.org/10.1016/B978-1-4557-3127-5.00004-0
Handajani, U., Harsini, M., & Wicaksono, Z. (2014). Determine of copper metal in cooking oil by saponification method with atomic absorption spectrophotometer (AAS). Malaysian Journal of Fundamental and Applied Sciences, 10(4), 179-183. https://doi.org/10.11113/mjfas.v10n4.270
Hernandez, E. M. (2016). 4 - Specialty oils: Functional and nutraceutical properties. In T. A. B. Sanders (Ed.), Function Dietary Lipids (pp. 69-101). Woodhead Publishing. https://doi.org/10.1016/B978-1-78242-247-1.00004-1.
Israelachvili, J. N. (2011). Intermolecular and Surface Forces. Academic press. https://doi.org/10.1016/C2009-0-21560-1
Jaarin, K., & Kamisah, Y. (2012). Repeatedly heated vegetable oils and lipid peroxidation. In A. Catala (Ed.), Lipid Peroxidation (pp. 211-228). InTech Open. http://dx.doi.org/10.5772/46076
Japar, N. S. A., Aziz, M. A. A., & Razali, M. N. (2020). Fundamental Study of Waste Oil Potential as Base Oil Alternative in Grease Formulation. Core. https://core.ac.uk/download/pdf/186358742.pdf
Johnson, O. A., & Affam, A. C. (2019). Petroleum sludge treatment and disposal: A review. Enviroment Engineering Research, 24(2), 191-201. https://doi.org/10.4491/eer.2018.134
Jong, H. N. (2021). Palm Oil Waste is Latest Item Declared Non-Hazardous by Indonesia. Mongabay. https://news.mongabay.com/2021/04/palm-oil-waste-spent-bleaching-earth-non-hazardous-indonesia/
Kamaruzaman, W. N., & Zin, N. S. M. (2019, June). Recycle of used cooking oil. [Paper presentation]. Conference: International Professional Learning Communities in Education 2019. Kuala Lumpur, Malaysia.
Khalid, R. S., Helaluddin, A., Alaama, M., Abdualkader, M. A., Kasmuri, A., & Abbas, S. A. (2016). Reliability of graphite furnace atomic absorption spectrometry as alternative method for trace analysis of arsenic in natural medicinal products. Tropical Journal of Pharmaceutical Research September, 15(9), 1967-1972. http://dx.doi.org/10.4314/tjpr.v15i9.22
Libert, M. A. (1987). Final report on the safety assessment of oleic acid, lauric acid, palmitic acid, myristic acid, and stearic acid. International Journal of Toxicology, 6(3), 321-401. https://doi.org/10.3109/10915818709098563
Livent. (2018). Handling Guide for Lithium Hydroxid. Livent. https://livent.com/wp-content/uploads/2018/10/Lithium-Hydroxide-Safe-Handling-Guide-v10.09.18.pdf
Lopes, M., Miranda, S. M., & Belo, I. (2020). Microbial valorization of waste cooking oils for valuable compounds production - A review. Critical Reviews in Environmental Science and Technology, 50(24), 2583-2616. https://doi.org/10.1080/10643389.2019.1704602
Manarattanasuwan, S. (2011). Toxic Trace Metals in Edible Oils by Graphite Furnace Atomic Absorption Spectrophotometry. Semantic Scholar. https://www.semanticscholar.org/paper/Toxic-Trace-Metals-in-Edible-Oils-by-Graphite/df2b51857be016623333351b98187a146c538a7c
Mannu, A., Garroni, S., Porras, J. I., & Mele, A. (2020). Available technologies and materials for waste. Processes, 8(3), Article 366. https://doi.org/10.3390/pr8030366
Mohammed, M. A. (2013). Effect of additives on the properties of different types of greases. Iraqi Journal of Chemical and Petroleum Engineering, 14(3), 11-21.
New Jersey Department of Health and Senior Services. (2014). Lithium hydroxide monohydrate. Hazardous Substance Fact Sheet. https://nj.gov/health/eoh/rtkweb/documents/fs/1128.pdf
Nizam, N. A., & Misdan, N. (2022). Review of the production of biodiesel from waste cooking oil using acid/alkaline based catalysts. Progress in Engineering Application and Technology, 3(1), 954-966. https://doi.org/10.30880/peat.2022.03.01.093
Noor, N. A. M., & Hua, A. K. (2016). Cooking oil management in cafeteria operator: A review. International Research Journal of Humanities & Social Science, 1(4), 29-39.
Othman, N. (2009). Production of grease from waste cooking oil [Bachelor dissertation]. Universiti Malaysia Pahang, Malaysia. https://www.semanticscholar.org/paper/PRODUCTION-OF-GREASE-FROM-WASTE-COOKING-OIL-BINTI-A-Othman/95a5a7edad68692a510a8918afc61369a47e3993
Panadare, D. C., & Rathod, V. K. (2015). Application of waste cooking oil than biodiesel: A review. Iranian Journal of Chemical Engineering, 12(3), 55-76.
Piotrowska-Cyplik, A., Chrzanowski, L., Cyplik, P., Dach, J., Olejnik, A., Staninska, J., Czarny, J., Lewicki, A., Marecik, R., & Powierska-Czarny, J. (2013). Composting of oiled bleaching earth: Fatty acids degradation, phytotoxicity and mutagenicity changes. International Biodeterioration & Biodegradation, 78, 49-57. https://doi.org/10.1016/j.ibiod.2012.12.007.
Raghavan, S., Hou, J., Baker, G., & Khan, S. (2000). Colloidal interactions between particles with tethered nonpolar chains dispersed in polar media: Direct correlation between dynamic rheology and interaction parameters. Langmuir, 16(3), 1066-1077. https://doi.org/10.1021/la9815953
Rahman, M. R., Hui, J. L. C., & Hamdan, S. (2018). 5 - Nanoclay dispersed phenol formaldehyde/fumed silica nanocomposites: Effect of diverse clays on physicomechanical and thermal properties. In M. R. Rahman (Ed.), Silica and Clay Dispersed Polymer Nanocomposites (Preparation, Properties and Applications) (pp. 59-70). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-102129-3.00005-1.
Rahman, W., Aziz, M. A. A., Hamid, N., & Japar, N. S. A. (2020). Thermal stability study of grease formulated from industrial waste oil. Platform: A Journal of Engineering, 4(1), 20-28.
Rajvanshi, A., & Pandey, P. K. (2016). Lubricating grease from waste cooking oil and waste motor sludge. International Jurnal of Chemical and Molecular Engineering, 10(9), 1220-1223. https://doi.org/10.5281/zenodo.1126898
Rav, A. P., Sivasankar, S., Razali, N. K., Karmegam, K., Velu, P., Kulanthayan, S., & Naeini, H. S. (2020). A review of occupational safety and health problems among quarry plant workers. Malaysian Journal of Medicine and Health Sciences, 16(11), 194-200.
Razali, M. N., Aziz, M. A. A., Hamdan, W. N. A. W. M., Salehan, N. A. M., & Rosli, M. Y. (2017). Synthesis of grease from waste oils and red gypsum. Australian Journal of Basic and Applied Sciences, 11(113), 154-159.
Rinaldi, L., Wu, Z., Giovando, S., Bracco, M., Crudo, D., Bosco, V., & Cravotto, G. (2017). Oxidative polymerization of waste cooking oil with air under hydrodynamic cavitation. Journal Green Processing and Synthesis, 6(4), 425-432. https://doi.org/10.1515/gps-2016-0142
Rokiah, O., Khairunisa, M., Youventharan, D., & Arif, S. M. (2019). Effect of processed spent bleaching earth content on the compressive strength of foamed concrete. IOP Conference Series: Earth and Environmental Science, 244(1), Article 012013. https://doi.org/10.1088/1755-1315/244/1/012013
Sani, G., & Florillo, A. (2020). The use of lithium in mixed states. CNS Spectrums, 25(4), 449-451. https://doi.org/10.1017/S1092852919001184
Savan, A., Pflüger, E., Voumard, P., Schröer, A., & Simmonds, M. (2006). Modern solid lubrication: Recent developments and applications of MoS2. Lubricant Science, 12(2), 185-203. https://doi.org/10.1002/ls.3010120206
Sharma, U. C., & Singh, N. (2019). Biogrease for enviroment friendly lubrication. In B. R. Gurjar & S. Y. Rao (Eds.), Environmental Science and Engineering Vol. 1 Sustainable Development (pp. 305-317). Studium Press.
Singh-Ackbarali, D., Maharaj, R., Mohamed, N., & Ramjattan-Harry, V. (2017). Potential of used frying oil in paving material: Solution to environmental pollution problem. Environmental Science and Pollution Research, 24, 12220-12226. https://doi.org/10.1007/s11356-017-8793-z
Sinitsyn, V. V., & Viktorova, Y. S. (1968). Graphite and molybdenum disulfide in plastic greases. Chemistry and Technology of Fuels and Oils, 4(8), 585-588. https://doi.org/10.1007/BF00717718
Smallwood, N. J. (2020). Use of spent bleaching earth from edible oil processing in the formulation salt (U.S. Patent No. 10,624,367). U.S. Patent and Trademark Office. https://patentimages.storage.googleapis.com/48/75/77/682b1b67dce123/US10624367.pdf
Smith, W. N., McCloskey, J., & Atterbury, A. (2000). Pouched ingredients for preparing greases (U.S. Patent No. 6,153,563). U.S. Patent and Trademark Office. https://patents.google.com/patent/US6153563A/en?oq=US6153563A
Srinivas, V., Thakur, R. N. & Jain, A. K. (2017). Anti-wear, anti-friction and extreme pressure properties of motor bike engine oil dispersed with molybdenum disulphide nano-particles. Tribology Transactions, 60(1), 12-19. https://doi.org/10.1080/10402004.2016.1142034.
Sugino, Y., & Kawaguchi, M. (2017). Fumed and precipitated hydrophilic silica suspension gels in mineral oil: Stability and rheological properties. Gels, 3(3), Article 32. https://doi.org/10.3390/gels3030032
Sun, B., Wang, X., Liao, Y. P., Ji, Z., Chang, C. H., Pokhrel, S., Ku, J., Liu, X., Wang, M., Dunphy, D. R., Li, R., Meng, H., Madler, L., Brinker, C. J., Nel, A. E., & Xia, T. (2016). Repetitive dosing of fumed silica leads to profibrogenic effects through unique structure-activity relationships and biopersistence in the lung. ACS Nano, 10(8), 8054-8066. https://doi.org/10.1021/acsnano.6b04143
Susskind, L., Chun, J., Goldberg, S., Gordon, J., Smith, G., & Zaerpoor, Y. (2020). Breaking out of carbon lock-in: Malaysia’s path to decarbonization. Frontiers in Built Environment, 6, Article 21. https://doi.org/10.3389/fbuil.2020.00021.
Suzihaque, M., Alwi, H., Ibrahim, U. K., Abdullah, S., & Haron, N. (2022). Biodiesel production from waste cooking oil: A brief review. Materials Today: Proceedings, 63(1), S490-S495. https://doi.org/10.1016/j.matpr.2022.04.527
Szelong, K., & Fan, K. (2020). Chemistry of lithium (Z=3). Libretexts Chemistry. https://chem.libretexts.org/Bookshelves/Inorganic_Chemistry/Supplemental_Modules_and_Websites_(Inorganic_Chemistry)/Descriptive_Chemistry/Elements_Organized_by_Block/1_s-Block_Elements/Group__1%3A_The_Alkali_Metals/Z003_Chemistry_of_Lithium_(Z3)
Tan, K. T., Lee, K. T., & Mohamed, A. R. (2011). Potential of waste palm cooking oil for catalyst-free biodiesel production. Energy, 36(4), 2085-2088. https://doi.org/10.1016/j.energy.2010.05.003
Vansant, E. F., Van Der Voort, P., & Vrancken, K. C. (1995). Characterization and Chemical Modification of the Silica Surface. Elsevier.
Vitz, E., Moore, J. W., Shorb, J., Prat-Resina, X., Wendorff, T., & Hahn, A. (2021). Foods- vegetable oil hydrogenation, trans fats, and percent yield. Chemistry LibreTexts. https://chem.libretexts.org/Bookshelves/General_Chemistry/Book%3A_ChemPRIME_(Moore_et_al.)/03%3A_Using_Chemical_Equations_in_Calculations/3.04%3A_Percent_Yield/3.4.02%3A_Foods-_Vegetable_Oil_Hydrogenation_Trans_Fats_and_Percent_Yield
Vollaard, B. (2017). Temporal displacement of environmental crime: Evidence from marine oil pollution. Journal of Environmental Economics and Management, 82, 168-180. https://doi.org/10.1016/j.jeem.2016.11.001
Whitby, C. P. (2020). Structuring edible oils with fumed silica particles. Frontiers in Sustainable Food Systems 4, Article 585160. https://doi.org/10.3389/fsufs.2020.585160
Yang, B., Kim, S., Choi, C. H., Jeoung, H. W., & Kim, H. (2017). Effects of scutellaria baicalensis extract on skin lesion of contact dermatitis induced by DNFB in mice. Journal of Physiology & Pathology in Korean Medicine, 31(1), 59-64. https://doi.org/10.15188/kjopp.2017.02.31.1.59
Younes, M., Aggett, P., Aguilar, F., Crebelli, R., Dusemund, B. Filipic, M., Frutos, M. J., Galtier, P., Gott, D., Gundert-Remy, U., Kuhnle, G. G. Leblanc, J. C., Lillegaard, I. T., Moldeus, P., Mortensen, A., Oskarsson, A., Stankovic, I., Waalkens-Berendsen, U. Woutersen, R. A … Lambre, C. (2018). Re-evaluation of silicon dioxide (E 551) as a food additive. European Food Safety Authority Journal, 16(1), Article e05088. https://doi.org/10.2903/j.efsa.2018.5088
Zebox, A., Abutolib, S., & Vaxobjon, M. (2022). Ways to improve the lubricating properties of greases. Texas Journal of Engineering and Technology, 7, 1-4.
ISSN 1511-3701
e-ISSN 2231-8542