Mohammad Nasrullah Ridzuan, Hasniza Abu Bakar, Emedya Murniwaty Samsudin, Nik Mohd Zaini Nik Soh and Lokman Hakim Ismail
Pertanika Journal of Science & Technology, Volume 31, Issue 3, April 2023
Keywords: Empty fruit bunch (EFB), empty fruit bunch cement boards (EFBCB), mechanical properties, physical properties, variation density
Published on: 7 April 2023
A cement board is a composite material mostly comprised natural fibre and cement. Cement board is mainly used in roofing, raised floors, dropped ceilings, prefabricated structures, office containers, and other building components. Fibres in cement composites from discarded palm oil fruit bunches have been used to increase the quality of construction materials. Therefore, the impact density of the natural fibre cement board is essential to enhance the physical and mechanical properties. However, research on untreated fibre at various densities has not been compressively discussed in previous studies. Therefore, this research used empty fruit bunch (EFB) fibre in manufacturing empty fruit bunch cement boards (EFBCB) with a cement-to-fibre ratio of 3:1 and thickness of 12 mm. Three target density variations, 1100 kg/m3, 1200 kg/m3 and 1300 kg/m3, were applied in this study to obtain their effect on physical and mechanical properties. The results revealed EFBCB sample with a target density of 1300 kg/m3 showed the most promising results. This sample’s average thickness is 12.38 mm after a 28-day curing period. Besides, at 1300 kg/m3 target density, EFBCB achieved the lowest thickness swelling (TS) value at 1.82%, highest internal bonding (IB) at 0.164 N/mm2, highest modulus of elasticity (MOE) and modulus of rupture (MOR) at 1398 N/mm2 and 3.51 N/mm2, respectively. Thus, increasing the cement board density and improving the physical and mechanical properties of EFBCB. This study demonstrates that EFB has the capacity to be one of the potential natural fibres for green building materials.
Ajayi, B., & Badejo, S. O. O. (2005). Effects of board density on bending strength and internal board of cement bonded flake-boards. Journal of Tropical Science, 17(2), 228-234
Akasah, Z. A., Dullah, H., Nik Soh, N. M. Z., & Anak Guntor, N. A. (2019). Physical and mechanical properties of empty fruit bunch fibre-cement bonded fibreboard for sustainable retrofit building. International Journal of Material Science and Engineering, 7(1), 1-9. https://doi.org/10.17706/ijmse.2019.7.1.1-9
Akinyemi, O. P., & Osasona, C. O. (2017). Strength properties of bamboo-fibre cement boards used as building partitions. Current Journal of Applied Science and Technology, 23(5), Article 36587.
Amel, B. A., Paridah, M. T., Rahim, S., H’ng, P. S., Zakiah, A., & Hussein, A. S. (2017). Physical-mechanical characteristics of cement-bonded kenaf bast fibres composite boards with different densities. Journal of Engineering Science and Technology, 12(8), 2254-2267
Ashori, A., & Nourbakhsh, A. (2008). Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials. Industrial Crops and Products, 28(2), 225-230. https://doi.org/10.1016/j.indcrop.2008.02.015
Ashori, A., Tabarsa, T., & Sepahvand, S. (2012). Cement-bonded composite boards made from poplar strands. Construction and Building Materials, 26(1), 131-134. https://doi.org/10.1016/j.conbuildmat.2011.06.001
Asasutjarit, C., Charoenvai, S., Hirunlabh, J., & Khedari, J. (2009). Materials and mechanical properties of pretreated coir-based green composites. Composites Part B, 40(7), 633-637. https://doi.org/10.1016/j.compositesb.2009.04.009
Azni, M. E., Norhan, A. S., Lofflad, H., & Roslan, S. N. (2015, October 13). Feasibility study on empty fruit bunch (EFB) cement board. Paper presentation at Proceedings of ISER 9th International Conference. Berlin, Germany.
British Standard Institution. (1993). Wood-based panels - Determination of modulus of elasticity in bending and of bending strength. BS EN 310. 1993. London.
British Standard Institution. (1993). Particleboards and fiberboards - Determination of tensile strength perpendicular to the plane of board. BS EN 319. 1993. London.
British Standard Institution. (1993). Wood-based panels - Determination of density. BS EN 323. 1993. London.
British Standard Institution. (1993). Wood-based panels - Determination of dimensions of boards. BS EN 324-1. 1993. London.
British Standard Institution. (1993). Particleboards and fiberboards - Determination of swelling in thickness after immersion in water. BS EN 317.1993. London.
Coutts, R. S. (2005). A review of Australian research into natural fibre cement composites. Cement and Concrete Composites, 27(5), 518-526. https://doi.org/10.1016/j.cemconcomp.2004.09.003
Egbewole, Z. T. (2017). Evaluation of strength and dimensional stability of cement bonded particle-board produced from selected wood sawdust residues. International Journal of Applied Research and Technology, 6(8), 44-53.
Garcez, M. R., Garcez, E. O., Machado, A. O., & Gatto, D. A. (2016). Cement-wood composites: Effects of wood species, particle treatments and mix proportion. International Journal of Composite Materials, 6(1), 1-8.
Ghofrani, M., Mokaram, K. N., Ashori, A., & Torkaman, J. (2015). Fiber-cement composite using rice stalk fiber and rice husk ash: Mechanical and physical properties. Journal of Composite Materials, 49(26), 3317-3322. https://doi.org/10.1177/0021998314561813
Gupta, G., Yan, N., & Feng, M. W. (2011). Effects of pressing temperature and particle size on bark board properties made from beetle-infested lodgepole pine (Pinus contorta) barks. Forest Products Journal, 61(6), 478-488. https://doi.org/10.13073/0015-7473-61.6.478
Ibrahim, S. H., Baharun, A., Nawi, M. N. M., & Affandi, R. (2014). Thermal performance of oil palm fibre and paper pulp as the insulation materials. UNIMAS Journal of Civil Engineering, Science and Technology, 5(2), 22-28. https://doi.org/10.33736/jcest.135.2014
Khalil, H. P. S. A., Firdaus, M. Y. N., Jawaid, M., Anis, M., Ridzuan, R., & Mohamed, A. R. (2010). Development and material properties of new hybrid medium density fibreboard from empty fruit bunch and rubberwood. Materials & Design, 31(9), 4229-4236. https://doi.org/10.1016/j.matdes.2010.04.014
Lin, C. Y. (2009). Study on effective utilization of palm oil waste (empty fruit bunch) system in Malaysia. System Malaysia, 3, 1-4.
Loh, Y. W., H’ng, P. S., Lee. S. H., Lum, W. C., & Tan, C. K. (2010). Properties of particleboard produced from admixture of rubberwood and mahang species. Asian Journal of Applied Science, 3(5), 310-316.
MPOB. (2020). Overview of The Malaysian Oil Palm Industry 2020. Malaysian Palm Oil Board. https://bepi.mpob.gov.my/
Mayowa, I. C., & Chinwuba, A. (2013). Effects of oil palm fibre on the compressive strength of mortar. Journal of Emerging Trends in Engineering and Applied Sciences, 4(5), 714-716.
Momoh, E. O., & Osofero, A. I. (2020). Recent developments in the application of oil palm fibers in cement composites. Frontiers of Structural and Civil Engineering, 14(1), 94-108 https://doi.org/10.1007/s11709-019-0576-9
Ogunjobi, K. M., Ajibade, M. A., Gakenou, O. F., & Gbande, S. (2019). Physical and mechanical properties of cement-bonded particle board produced from anogeissus leiocarpus (DC.) guill and perr wood species. African Journal of Agriculture Technology and Environment, 8(1), 192-199
Onuorah, E. O., Okeke, C. A., Nwabanne, J. T., Nnabuife, E. L. C., & Obiorah, S. O. M. (2015). The effects of production parameters on properties of single and 3-layer cement-bonded composites made from oil palm empty fruit bunch and tropical hardwood sawmill residue. World Journal of Engineering, 12(6),
Olusegun, A., Makun, A., Ogara, H. A., Edema, I. N., Idaho, M., Olubamiwo, K. O., & Eshiett, M. E. (2012). The Oil Palm Wastes in Malaysia. Intech.
Owoyemi, J. M., Ogunrinde, O. S., & Oyeleye, I. O. (2020). Physical and mechanical properties of cement bonded strand board produced from Gmelina arborea (Roxb.) harvesting residues. African Journal of Agricultural Research, 16(7), 976-982. https://doi.org/10.5897/AJAR2020.14809
Peter, P., Soh, N. M. Z. N., Akasah, Z. A., & Mannan, M. A. (2020). Durability evaluation of cement board produced from untreated and pre-treated empty fruit bunch fibre through accelerating ageing. IOP Conf. Series: Materials Science and Engineering, 713, Article 012019
Papadopoulos, A. N. (2008). Mechanical properties and decay resistance of hornbeam cement bonded particleboards. Advances in Materials Science and Engineering, 2008, Article 379749. http://dx.doi.org/10.1155/2008/379749
Rasat, M. S. M., Wahab, R., Sulaiman, O., Moktar, J., Mohamed, A., Tabet, T. A., & Khalid, I. (2011). Properties of composite boards from oil palm frond agricultural waste. BioResources, 6(4), 4389-4403
Samsudin, E. M., Ismail, L. H., Kadir, A. A., & Mokdar, S. S. S. (2016). Comparison on acoustic performance between dust and coir form empty fruit bunches (EFB) as sound absorption material. Jurnal Technology (Sciences & Engineering), 78(5), 191-196.
Soydan, A. M., Sari, A. K., Burcu, D., Recep, A., & Bahadır, T. (2018). Air-cured fiber-cement composite mixtures with different types of cellulose fibers. Advances in Materials Science and Engineering, 2018, Article 3841514. https://doi.org/10.1155/2018/3841514
Wahab, R., Dom, S. M. M., Mustafa, M. T., Samsi, H. W., Rasat, S. M., & Khalid, I. (2015). Properties of empty fruit bunch oil palm (Elaeis guineesis) composite boards at different densities and resin contents. Journal of Plant Sciences, 10(5), 179-190. http://dx.doi.org/10.3923/jps.2015.179.190
Wong, E. D., Zhang, M., Wang, Q., & Kawai, S. (2009). Formation of the density profile and its effects on the properties of particleboard. Wood Science Technology, 33(4), 327-340. https://doi.org/10.1007/s002260050119
Yang, H. S., Kim, D. J., & Kim, H. J. (2003). Rice straw-wood particle composite for sound absorbing wooden construction materials. Bioresources Technology, 86(2), 117-121. https://doi.org/10.1016/S0960-8524(02)00163-3
Share this article