PERTANIKA JOURNAL OF TROPICAL AGRICULTURAL SCIENCE

This paper demonstrates the potential of waste turbine oil (WTBO) as a base oil to substitute for mineral oil, which is usually used in grease formulations. This study will analyze the characteristics of used turbine oil, including its chemical composition and physical characteristics, including kinematic viscosity, viscosity index, moisture content, contamination, and density. The presence of antioxidants (butylated hydroxytoluene (BHT) and amine or phenyl-a-naphthylamine (PANA), anti-wear, and corrosion-inhibiting additives that can improve the formulated lubricating grease performance and lengthen service life are just a few of the useful remaining WTBO characteristics that can be used wisely as the base oil. It is crucial to create more environmentally friendly, economically sensible, and thrifty grease formulations to adhere to Malaysia’s Green Technology Master Plan, which has outlined the strategic plans for developing green technologies. The new inventions must establish a resource- and carbon- efficient economy. The abundance of WTBO in the aviation industry and the unique characteristics of WTBO itself promise a reliable supply of base oil for lubricating grease in the future.

• Aganbi, E., Iwegbue, C. M. A., & Martincigh, B. S. (2019). Concentrations and risks of polychlorinated biphenyls (PCBs) in transformer oils and the environment of a power plant in the Niger Delta, Nigeria. Toxicology Reports, 6, 933-939. https://doi.org/10.1016/j.toxrep.2019.08.008

• Alias, N. H., Aziz, M. H. A., Adam, M. R., Aizudin, M., & Ang, E. H. (2023). Polymeric/ceramic membranes for water reuse. In M. Sillanpää, A. Khadir, & K. Gurung (Eds.), Resource Recovery in Drinking Water Treatment (pp. 65-92). Elsevier.

• Aziz, M. A. A., Isa, K. M., & Rashid, R. A. (2017). Pneumatic jigging: Influence of operating parameters on separation efficiency of solid waste materials. Waste Management & Research, 35(6), 647-655. https://doi.org/10.1177/0734242X17697815

• Aziz, M. A. A., Isa, K. M., Miles, N. J., & Rashid, R. A. (2018). Pneumatic jig: Effect of airflow, time and pulse rates on solid particle separation. International Journal of Environmental Science and Technology, 16, 11-22. https://doi.org/10.1007/s13762-018-1648-4

• Arkı, E., & Balköse, D. (2013). Metal soap greases. In G. E. Zaikov, A. N. Goloshchapov & A. V. Lobanov (Eds.) Progress in Organic and Physical Chemistry: Structures and Mechanisms (pp. 55-75). CRC Press. https://doi.org/10.1201/b13964-7

• Bhat, S. A., & Charoo, M. S. (2019). Effect of additives on the tribological properties of various greases-A review. Materials Today: Proceedings, 18(7), 4416-4420. https://doi.org/10.1016/j.matpr.2019.07.410

• Borras, X., Rooij, M. B. D., & Schipper, D. J. (2018). Rheological and wetting properties of Environmentally Acceptable Lubricants (EALs) for application in stern tube seals. Lubricants, 6(4), Article 100. https://doi.org/10.3390/lubricants6040100

• Canter, N. (2012). Grease additives: Important contributors not to be overlooked. Tribology and Lubrication Technology, 68(12), Article 28.

• Cecilia, J. A., Plata, D. B., Saboya, R. M. A., de Luna, F. M. T., Cavalcante Jr, C. L., & Rodríguez-Castellón, E. (2020). An overview of the biolubricant production process: Challenges and future perspectives. Processes, 8(3), Article 257. https://doi.org/10.3390/pr8030257

• Chandraseagar, S., Abdulrazik, A. H., Abdulrahman, S. N., & Abdaziz, M. A. (2019). Aspen plus simulation and optimization of industrial spent caustic wastewater treatment by wet oxidation method. IOP Conference Series: Materials Science and Engineering, 702(1), Article 012011. doi:10.1088/1757-899X/702/1/012011

• Chatra, K. R. S., & Lugt, P. M. (2020). Channeling behavior of lubricating greases in rolling bearings: Identification and characterization. Tribology International, 143, Article 106061. https://doi.org/10.1016/j.triboint.2019.106061

• Decote, P. A., Negris, L., Vidoto, A. P., Mendes, L. A., Flores, E. M., Vicente, M. A., & Santos, M. F. (2021). Determination of the total acid number of Brazilian crude oil samples: Theoretical and experimental evaluation of three standard methods. Fuel, 313, Article 122642. https://doi.org/10.1016/j.fuel.2021.122642

• Efimov, P. (2020). Finnish industrial area market research. Case company: Nordic access [Unpublish degree thesis]. University of Applied Sciences.

• ENEOS Corporation (2018). Product bulletin : TURBINE OIL turbine oil without additive. ENEOS Corporation. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.eneos.co.jp/english/products/lubricants/pdf/ind-3502-2104e.pdf

• Fan, X., Li, W., Li, H., Zhu, M., Xia, Y., & Wang, J. (2018). Probing the effect of thickener on tribological properties of lubricating greases. Tribology International, 118, 128-139. https://doi.org/10.1016/j.triboint.2017.09.025

• Fischer, D., Jacobs, G., Stratmann, A., & Burghardt, G. (2018). Effect of base oil type in grease composition on the lubricating film formation in EHD contacts. Lubricants, 6(2), Article 32. https://doi.org/10.3390/lubricants6020032

• Fuskele, V., Baredar, P., Sarviya, R. M., Lal, S., & Awasthi, S. (2022). Wind turbine nacelle cooling systems: A review. Wiley Interdisciplinary Reviews: Energy and Environment, 11(6), Article e456. https://doi.org/10.1002/wene.456

• Glushkov, D. O., Paushkina, K. K., & Shabardin, D. P. (2020). Co-combustion of coal processing waste, oil refining waste and municipal solid waste: Mechanism, characteristics, emissions. Chemosphere, 240, Article 124892. https://doi.org/10.1016/j.chemosphere.2019.124892

• Gong, H., Yu, C., Zhang, L., Xie, G., Guo, D., & Luo, J. (2020). Intelligent lubricating materials: A review. Composites Part B: Engineering, 202, Artilce 108450. https://doi.org/10.1016/j.compositesb.2020.108450

• Gupta, M. K. (2017). Requirement for successful production and delivery of the refined vegetable oils. In Practical Guide to Vegetable Oil Processing (pp. 1-5). Academic Press.

• Herman, I. T., Isa, K. M., Ibrahim, N., Kasim, F. H., & Aziz, M. A. A. (2021). A single step transesterification process to produce biodiesel from the spent cooking oil. IOP Conference Series: Earth and Environmental Science, 765, Article 012077. https://doi.org/10.1088/1755-1315/765/1/012077

• Hester, R. E., & Harrison, R. M. (2010). Ecosystem services. RSC Publishing.

• Hsu, S., & Gates, R. (2000). Boundary lubrication and boundary lubricating films. CRC Handbook of Modern Tribology

• Ismail, N. A., Aziz, M. A. A., Hisyam, A., & Abidin, M. A. (2021). Separation of samarium from medium rare earth mixture using multi-stage counter-current extraction. Chemical Engineering Communications, 208(5), 764-774. https://doi.org/10.1080/00986445.2020.1746654

• Ismail, N. A., Yunus, M. M., Aziz, M. A., & Abidin, M. A. (2019). Comparison of optimal solvent extraction stages between P204 and [A336][P204] for the separation of europium and gadolinium. IOP Conference Series: Materials Science and Engineering, 702(1), Article 012044. https://doi.org/10.1088/1757-899X/702/1/012044

• Japar, N. S. A., Aziz, M. A. A., & Rahman, N. W. A. (2020). Conversion of waste transformer oil into grease. In A. Z. Yaser (Ed.), Advances in Waste Processing Technology (pp. 23-35). Springer.

• Japar, N. S. A., Aziz, M. A. A., Razali, M. N., & Rahman, N. W. A. (2018). Grease and its application on electrical equipment: A review. International Journal of Engineering and Technology(UAE), 7(3.26), 23-39. https://doi.org/10.14419/ijet.v7i3.26.17455

• Japar, N. S. A., A. Aziz, M. A., Razali, M. N., Zakaria, N. A., & Rahman, N. W. A. (2019). Preparation of grease using organic thickener. Materials Today: Proceedings, 19, 1303-1308. https://doi.org/10.1016/j.matpr.2019.11.141

• Jeanna, V. R. (2017). Thickener structure. Tribology & Lubrication Technology, 73(12), 26-30.

• Johnson, M. (2008). Understanding grease construction and function. Tribology and Lubrication Technology, 64(6), 32-38.

• Kanazawa, Y., Sayles, R., & Kadiric, A. (2017). Film formation and friction in grease lubricated rolling-sliding non-conformal contacts. Tribology International, 109, 505-518. https://doi.org/10.1016/j.triboint.2017.01.026

• Kaperick, J. P. (2013). Grease thickeners. In Q. J. Wang & Y. W. Chung (Eds.) Encyclopedia of Tribology (pp. 1562-1567). Springer.

• Kuppusamy, S., Maddela, N. R., Megharaj, M., & Venkateswarlu, K. (2020). An overview of total petroleum hydrocarbons. In Total Petroleum Hydorcarbons (pp. 1-27). Springer. https://doi.org/10.1007/978-3-030-24035-6_1

• Liu, J., Gu, K., Duan, H., Zhao, Y., & Li, J. (2013). Tribological and economic evaluation of recycled mineral lubricating oils. Science China Technological Sciences, 56, 2964-2972. https://doi.org/10.1007/s11431-013-5408-x

• Liu, Z., Wang, H., Zhang, L., Sun, D., Cheng, L., & Pang, C. (2016). Composition and degradation of turbine oil sludge. Journal of Thermal Analysis and Calorimetry, 125(1), 155-162. https://doi.org/10.1007/s10973-015-5200-1

• Mahadeshwara, M. R., Rosa, F., Vuchkov, T., Vilhena, L., Ramalho, A., Sharma, P., & Cavaleiro, A. (2023). Investigating the synergistic effect of electrochemical texturing and MoSeC coatings on the frictional behaviour of lubricated contacts. Coatings, 13(4), Article 692. https://doi.org/10.3390/coatings13040692

• Mahmud, M. S., Ishak, S., Razali, M. N., Aziz, M. A. A., & Musa, M. (2019). Grease quality issues on middle voltage switchgear: Corrosivity, resistivity, safety and ageing. IIUM Engineering Journal, 20(1), 216-228. https://doi.org/10.31436/iiumej.v20i1.995

• Mang, T., & Dresel, W. (2007). Lubricants and lubrication: John Wiley & Sons.

• Mortier, R. M., Fox, M. F., & Orszulik, S. (2011). Chemistry and technology of lubricants. Springer.

• Negi, P., Singh, Y., & Tiwari, K. (2021). A review on the production and characterization methods of bio-based lubricants. Materials Today: Proceedings, 46, 10503-10506. https://doi.org/10.1016/j.matpr.2020.12.1211

• Niu, M., Qu, J., & Gu, L. (2019). Synthesis of titanium complex grease and effects of graphene on its tribological properties. Tribology International, 140, Article 105815. https://doi.org/10.1016/j.triboint.2019.06.008

• Pirro, D. M., Webster, M., & Daschner, E. (2016). Lubrication fundamentals, revised and expanded. CRC Press.

• Rahman, N. W., & Aziz, M. A. A. (2022). The effects of additives on anti-wear properties of lubricating grease formulated from waste engine oil. Egyptian Journal of Petroleum, 31(3), 71-76. https://doi.org/10.1016/j.ejpe.2022.07.002

• Rawat, S. S., & Harsha, A. P. (2019). Current and future trends in grease lubrication. In J. K. Katiyar, S. Bhattachary, V. K. Patel & V. Kumar (Eds.), Automotive Tribology (pp. 147-182). Springer.

• Razali, M. N., Aziz, M. A. A., Jamin, N. F. M., & Salehan, N. A. M. (2018). Modification of bitumen using polyacrylic wig waste. AIP Conference Proceedings, 1930(1), Article 020051. https://doi.org/10.1063/1.5022945

• Razali, M. N., Isa, S., Md Salehan, N., Musa, M., Abd Aziz, M. A., Nour, A., & Yunus, R. (2020). Formulation of emulsified modification bitumen from industrial wastes. Indonesian Journal of Chemistry, 20(1), 96-104. https://doi.org/10.22146/ijc.40888

• Rohim, R., Isa, K. M., Abdullah, T. A. T., Rashid, R. A., & Aziz, M. A. (2021). Methanolysis of duckweed and azolla: A comparative analysis. IOP Conference Series: Earth and Environmental Science, 765(1), Article 012099. https://doi.org/10.1088/1755-1315/765/1/012099

• Rudnick, L. R. (2013). Synthetics, mineral oils, and bio-based lubricants: Chemistry and technology (2nd ed.). CRC Press.

• Russo, S., Brambilla, L., Thomas, J. B., & Joseph, E. (2023). But aren’t all soaps metal soaps? A review of applications, physico-chemical properties of metal soaps and their occurrence in cultural heritage studies. Heritage Science, 11(1), Article 172. https://doi.org/10.1186/s40494-023-00988-3

• Shahnazar, S., Bagheri, S., & Hamid, S. B. A. (2016). Enhancing lubricant properties by nanoparticle additives. International Journal of Hydrogen Energy, 41(4), 3153-3170. https://doi.org/10.1016/j.ijhydene.2015.12.040

• Sharma, S., Gupta, V., & Mudgal, D. (2022). Current trends, applications, and challenges of coatings on additive manufacturing based biopolymers: A state of art review. Polymer Composites, 43(10), 6749-6781. https://doi.org/10.1002/pc.26809

• Shekarchian, M., Moghavvemi, M., Motasemi, F., Zarifi, F., & Mahlia, T. M. I. (2012). Energy and fuel consumption forecast by retrofitting absorption cooling in Malaysia from 2012 to 2025. Renewable and Sustainable Energy Reviews, 16(8), 6128–6141. https://doi.org/10.1016/j.rser.2012.07.013

• Sofi, S. N. A. M., Aziz, M. A. A., Japar, N. S. A., Rahman, N. W. A., Abdulhalim, A. R., & Yunus, M. Y. M. (2019). Preparation and characterization of grease formulated from waste transformer oil. IOP Conference Series: Materials Science and Engineering, 702(1), Article 012034. https://doi.org/10.1088/1757-899X/702/1/012034

• Soleimani, M., Dehabadi, L., Wilson, L., & Tabil, L. (2018). Antioxidants classification and applications in lubricants. In D. W. Johnson (Ed.), Librication: Tribology, Lubricants and Additives. IntechOpen.

• Sta˚hl, J., & Jacobson , B. O. (2003). A lubricant model considering wall-slip in EHL line contacts. Journal of Tribology, 125(3), 523-532. https://doi.org/10.1115/1.1537750

• Suhaila, N., Japar, A., Aizudin, M., Aziz, A., & Razali, M. N. (2018). Formulation of lubricating grease using Beeswax thickener. IOP Conference Series: Materials Science and Engineering, 342(1), Article 012007. https://doi.org/10.1088/1757-899X/342/1/012007

• Tańczuk, M., Skorek, J., & Bargiel, P. (2017). Energy and economic optimization of the repowering of coal-fired municipal district heating source by a gas turbine. Energy Conversion and Management, 149, 885-895. https://doi.org/10.1016/j.enconman.2017.03.053

• Tichy, J., Menut, M., Oumahi, C., Muller, S., & Bou-Saïd, B. (2021). Grease flow based on a two-component mixture model. Tribology International, 153, Article 106638. https://doi.org/10.1016/j.triboint.2020.106638

• Vandervort, J., Lukasik, G., Ayyildiz, B., Solom, M., Delgado, A., Kirkland, K. V., & Patil, A. (2021). Performance evaluation of a Terry GS-2 steam impulse turbine with air-water mixtures. Applied Thermal Engineering, 191, Article 116636. https://doi.org/101016/japplthermaleng2021116636

• Verified Market Research. (2022). Global Turbine Oil Market Size by Type, by Application, by Viscosity Grade, by Geographic Scope and Forecast. https://www.verifiedmarketresearch.com/product/turbine-oil-market/#

• Vershinina, K., Shabardin, D., & Strizhak, P. (2019). Burnout rates of fuel slurries containing petrochemicals, coals and coal processing waste. Powder Technology, 343, 204-214. https://doi.org/10.1016/j.powtec.2018.11.052

• Whitby, C. P. (2020). Structuring edible oils with fumed silica particles. Frontiers in Sustainable Food Systems, 4, Article 585160. https://doi.org/10.3389/fsufs.2020.585160

• Wu, C., Hong, Y., Ni, J., Teal, P. D., Yao, L., & Li, X. (2023). Investigation of mixed hBN/Al2O3 nanoparticles as additives on grease performance in rolling bearing under limited lubricant supply. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 659, Article 130811. https://doi.org/10.1016/j.colsurfa.2022.130811

• Yano, A., Akiyama, Y., Matsuoka, M., & Takayanagi, K. (2013). Study on the evaluation method of sludge formation during the oxidation process of gear oils. Tribology Online, 8(2), 162-170. https://doi.org/10.2474/trol.8.162

• Zhang, E., Li, W., Zhao, G., Wang, Z., & Wang, X. (2021). A study on microstructure, friction and rheology of four lithium greases formulated with four different base oils. Tribology Letters, 69(3), Article 98. https://doi.org/10.1007/s11249-021-01469-z